BUSH DAB+ DIGITAL RADIO BR05DAB - Manual (Page 11)

11
BR05DAB
OPERATING INSTRUCTIONS
Automatic Tuning
Manual Tuning
Storing a Station Preset
Recalling a Station Preset
1. DLS (Dynamic Label Segment) - This is the scrolling message that
the broadcaster may include with their transmissions. This message
usually includes information, such as program detail, song title etc.
2. Signal Strength - This shows the signal transmission level.
3. Program Type - This is the type and description of the program
provided by the DAB+ station.
4. Ensemble Name - This will show the multiplex that is broadcasting
the program you are listening to.
5. Channel Frequency - This displays the channel number and the
transmission frequency.
6. Signal Error - If the transmission signal contains any errors, the
system will apply corrections. The amount of signal corrections
can be displayed as a numerical value between 0 and 99. As the
value increases, you will hear the signal degrade.To improve
reception, try adjusting the position of the antenna.
DLS scrolling text ( )
Signal Strength
Program Type
Ensemble Name
Channel Frequency
Signal Error
Bitrate
Time
Date
7. Bitrate - This shows the signal bit-rate and the signal mode.
8/9. Time and Date: This shows the current time and date provided by the broadcaster.
Please Note: A signal error rate of 30 or more will make the station inaudible.
FM OPERATION
To switch from DAB+ to FM, press the Mode Button. FM Mode will then show up on the display.
1. Press the SCAN Button to auto search for the next available station.
2. If you find the reception is poor, use the Manual Tuning option below, to fine tune the station.
1. Press the < and > Buttons to manually scan through the frequency band.
2. The frequency will increases or decreases by 0.05MHz for each time you press < and > Buttons.
You can preset up to 10 FM stations for easy access as follows:
1. Tune to the station you wish to preset. Press and hold PRESET Button until the display shows:
2. Using the < and > Buttons, select the preset number from 1-10 you wish to use. Then press
the SELECT Button to store the station.
1. Press the PRESET Button and use the < and > Buttons to select your desired Preset.
2. Press the SELECT Button play that to play the Preset Station.