Baby Jogger ASTM F833-07A - Manual (Page 5)

6
To remove canopy: stand facing the stroller
and press the bracket buttons with index
finger while removing canopy from the
bracket.
1 To attach canopy to frame, simply slide canopy
axle into top hole of the bracket on the
frame, until you hear it click into place. The
bottom hole can be used for accessories (sold
separately), and they should be inserted into
bracket the same way as the canopy.
Canopy
3 Secure canopy around frame
with velcro tab.
2 Snap webbing together
around top of frame.
4 Once canopy is in place,
attach the console by
aligning the velcro strips
on the console and
canopy.
7
Seat
1 Secure seat fabric to
frame by lining up
snap placement on
frame and fabric.
To fold stroller:
Remove child
from seat.
Unsnap safety
straps from
frame and pull
upwards on the
fold straps with
a gentle tug.
3 Secure safety straps to both
sides of the frame before use.
4 Be sure that fold strap rings are secured to the
frame before use.
2 Secure seat straps around the bottom
of the frame, behind the front wheels.
Thread one seat strap through the D
ring of the other strap, and fasten both
Velcro sides firmly together.
Warning: always be
sure the safety strap
is securely snapped
onto the frame
before using stroller!