Pioneer DV-696AV-S - Manual (Page 48)

Initial Settings menu 07
48
En
HDMI output with DVD-Audio sources
DVD-Audio sources often have high sample rates (such as 192kHz/24bit/2 channel or 96kHz/24bit/
6 channel) and the way they are output from the HDMI terminal will depend on the specification
of the connected component.
* 1 This unit checks the specification of the connected component (such sample rate / multi-
channel limitations and CPPM compatibility) and outputs the signal accordingly. Note that ‘DVD
Audio compatible’ indicates compatibility with CPPM (Content Protection for Pre-recorded
Media).
* 2 If HDMI Audio setting (page 39) is set to LPCM (2 CH) , multichannel sources will be downmixed
to stereo. (In cases where the source is downmix-prohibited, only the front left/right channels are
output.)
If the video output resolution is 480i, 576i, 480p or 576p, audio output may be limited to 2 channel
(depending to the connected component).
* 3 In cases where the source is downmix-prohibited, only the front left/right channels are output.
* 4 If CPPM shows in the front panel display, it means it is not possible to output CPPM copycon-
trolled DVD-Audio sources from the HDMI connection. Discs with no CPPM protection are limited
to 2 channel output.
Component specification
Disc Format
2 ch
DVD-Audio and
5.1 channel compatible on HDMI
*1
DVD-Audio and
2 channel compatible on HDMI
*1
Left/Right or
2 ch downmix *3
Incompatible with
DVD-Audio on HDMI
*1
2 ch
2 ch
VSX-AX4AVi-s
VSX-AX2AV-s
PDP-506HDE/FDE
PDP-436XDE/FDE
PDP-505XDE/HDE
5.1 ch
No sound *4 No sound *4
5.1 ch *2
Component/output
Example
Component
09_initial_settings.fm 48 ページ ２００６年４月１５日 土曜日 午前６時３３分