Pioneer CD-BTB100 - Manual (Page 35)

Displaying the device
information of this unit
You can display the device information of this
unit such as the BD address and the device
name.
Should this unit fails to operate properly and
you consult with dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
! Each device featuring Bluetooth wireless
technology is allocated a unique 48-bit de-
vice address. Each device address consists
of a 12-digit of hexadecimal string.
% Display and switch the device informa-
tion
Refer to Function compatibility charts on page
26.
Each time you operate according to Function
compatibility charts the information changes
in the following order:
BD (Bluetooth Device) address
—Device name
( PIONEER)
—System version—Bluetooth mod-
ule version
# On your cellular phone, you can confirm the
device name of this unit as
Pioneer BT unit.
Connecting a Bluetooth
audio player
For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wire-
less connection.
This function initiates the connection via Blue-
tooth wireless technology.
Important
When using this unit as an external unit, the PIN
code is set to
0000. You can not change the PIN
code. This unit can connect only the Bluetooth
audio player which request 0000 as the PIN code
or does not request any PIN code.
1 Put the unit in C.OPEN mode
Refer to Function compatibility charts on page
26.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, the connection
to this unit will be automatically established.
# Before you put the unit in C.OPEN mode
NO AUDIO is displayed.
2 Use the Bluetooth audio player to con-
nect to this unit.
When the connection is established,
BT AUDIO is displayed.
# Operation varies depending on the type of
your Bluetooth audio player. Refer to the instruc-
tion manual that came with your Bluetooth audio
player for detailed instructions.
# You may need to enter the link code on your
Bluetooth audio player to complete the con-
nection.
Disconnecting a Bluetooth
audio player
When you are done using your Bluetooth
audio player with this unit, you can close the
Bluetooth wireless connection.
% Put the unit in DISCONN. mode.
Refer to Function compatibility charts on page
26.
After the disconnection is completed,
NO AUDIO is displayed.
Operating with different
head units
En
35
English
Section
05