Adjusting equalizer curves 12, Adjusting loudness 12, Adjusting source levels 12 – Pioneer DEH-2020MP User Manual
Page 12: Other functions, Adjusting initial settings 12, Operating this unit, Adjusting equalizer curves, Adjusting loudness, Adjusting source levels, Adjusting initial settings
! When FLAT is selected no supplement or
correction is made to the sound.
% Press EQ to select the equalizer.
Press
EQ repeatedly to switch between the fol-
lowing equalizers:
DYNAMIC
—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1
Press AUDIO to select BASS/MID/
TREBLE.
2
Press a or b to adjust the level.
+6 to
–6 is displayed as the level is increased
or decreased.
# To return to the normal display, press BAND.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press a or b to turn loudness on or off.
# You can also turn loudness on or off by press-
ing and holding
EQ.
3
Press c or d to select a desired level.
LOW (low)
—HI (high)
# To return to the normal display, press BAND.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM volume level,
which remains unchanged.
! The MW/LW volume level can also be ad-
justed with source level adjustments.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Press AUDIO to select SLA.
3
Press a or b to adjust the source vo-
lume.
SLA +4 to SLA
–4 is displayed as the source
volume is increased or decreased.
# To return to the normal display, press
BAND.
Other Functions
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Press SOURCE and hold until the unit
turns off.
2
Press SOURCE and hold until function
name appears in the display.
3
Press FUNCTION to select one of the in-
itial settings.
Press
FUNCTION repeatedly to switch be-
tween the following settings:
FM (FM tuning step)
—A-PI (auto PI Seek)—
AUX (auxiliary input)
—SAVE (power save)—
TITLE (multi language)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down
SOURCE until the unit turns off.
Operating this unit
En
12
Section
02