Pioneer AVIC-HD1BT - Manual (Page 10)

8
Chapter
1
Notes B
efore Using
the Syst
em
➲ For details about handling the LCD panel ➞
Page 19
For comfortable LCD viewing
Due to its construction, the viewing angle of the
LCD screen is limited. The viewing angle can be
increased, however, by using [Brightness] to
adjust the black density of the video. When using
for the first time, adjust the black density in
accordance with the viewing angle to adjust for
clear viewing. [Dimmer] can also be used to
adjust the brightness of the LCD screen itself to
suit your personal preference.
Notes for Internal Memory
Before removing the vehicle bat-
tery
If the battery is disconnected or discharged, the
memory will be erased and must be repro-
grammed.
➲ For details, refer to “Returning the Navigation
System to the Default or Factory Settings” in
the Operation Manual.
Resetting the microprocessor
• Pressing the RESET button mainly clears
the settings for the AV source without
clearing all the items of navigation func-
tions. Please see section “Returning the
Navigation System to the Default or Fac-
tory Settings” of the Operation Manual
before clearing.
Pressing the RESET button lets you reset the
microprocessor to its initial settings without
changing the condition memory.
➲ Condition memory ➞ Page 16
The microprocessor must be resetted under the
following conditions:
• Prior to using this navigation system for the
first time after installation.
• If the product fails to operate properly.
• If there appear to be problems with the opera-
tion of the system.
• When changing the combination of the equip-
ment.
• When adding/removing additional products
that connect to the navigation system.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip or
other pointed instrument.
❒ If you have connected other equipment (for
example, a TV tuner) to this navigation system,
be sure to reset that equipment, too.
RESET button