beautypg.com

Using a bluetooth device to pair, Connecting to a bluetooth device, Automatically – Pioneer AVH-P4200DVD User Manual

Page 42: Connecting to a bluetooth device automatically, 12 detailed instructions

background image

Switching between the device
names and BD addresses.

# To cancel searching, touch Stop.
# If five devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to Deleting a paired device. on this
page.
# If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.

4

Touch a device name to select the de-

vice you want to connect to.
While connecting,

Pairing is displayed. If the

connection is established,

Paired is displayed.

# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
# When establishing connection, the icon is dis-
played.
Touch the icon to disconnect the device.

Disconnecting a Bluetooth device.

# If you want to delete a paired Bluetooth tele-
phone, display

Delete OK?. Touch Yes to delete

the device.

Deleting a paired device.

# Never turn the unit off while the paired Blue-
tooth telephone is being deleted.

Using a Bluetooth device to
pair

(Function of AVH-P3200BT)

If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.

1

Display the Bluetooth Connection

Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 23.

2

Touch Special Device to select the spe-

cial device.

# Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.

3

Touch the special device list to open the

connection.
This unit is now on standby for a connection
with the Bluetooth device.

# If five devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to Deleting a paired device. on this
page.

4

Use your Bluetooth device to establish

a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting,

Pair your phone is dis-

played. If the connection is established,
Paired is displayed.

# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next
page.

Connecting to a Bluetooth
device automatically

(Function of AVH-P3200BT)

En

42

Section

12

Detailed instructions

This manual is related to the following products: