Bogen V60 - Manual (Page 13)

The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the number
of inputs on Bogen or other public address amplifiers. The CAM2 provides four professional, low-impedance, balanced microphone
inputs through XLR connectors and one auxiliary input.
Individual phantom power switches for each input allow the use of both dynamic and condenser microphones on the
same unit. A bridging input permits simple interconnection of multiple CAM2 mixers for system expansion without the need
to sacrifice any mixer inputs. Clipping indicators for each input and an output level meter provide information to the system
operator about sound integrity. Wide frequency response, low distortion, low noise, and high channel crosstalk isolation ensure
superior sound quality. The CAM2’s balanced mixer output can be switched between line-level (+4 dBµ) or microphone-
level (-50 dBµ) for compatibility with a wide range of sound processing equipment.
Rear Panel
Output XLR Connector -
Provides a balanced output
compatible with most
professional equipment.
MIC Inputs -
Balanced MIC level
XLR inputs.
Output Level Switch -
Switch changes the nominal
signal level of the XLR output
from +4 dBµ to -50 dBµ.
Line Output Connector (Line Out) -
RCA jack provides unbalanced output signal
compatible with most amplifiers, recording
equipment, and other audio equipment.
Not affected by Output Level switch.
Bridging -
The bridging jacks facilitate the connecting to-
gether of mixers to obtain additional inputs
without using any of the CAM2’s inputs.
Auxiliary Input (AUX In) -
A dedicated unbalanced
auxiliary input for tuner,
CD player, etc.
Phantom Power -
The CAM2 provides power for electret
condenser microphones. The Phantom
ON/OFF switch controls the applications
of DC voltage to each MIC input.
P r o d u c t F e a t u r e s :
• 4 Microphone inputs
• Low-impedance, balanced MIC inputs
• 1 High-impedance AUX input
• Low-noise, active mixing
• Master volume control
• Input clipping indicator for each channel
• 5-Segment LED output level meter
• XLR microphone input connectors
• Phantom power selectable per MIC input
• Unbalanced line-level output
• Balanced XLR output
• Illuminated power switch
• Switchable output level (+4/-50 dBµ)
• Compact size
• Bridging input for connecting together
multiple CAM2 mixers
• Rack- or wall-mounted with RPK35B
or WMK1
• Listed to UL Standard 60065 for US & Canada
RPK35B
Rack Mounting
Kit
WMK1
In-Wall
Mounting Kit
Accessories
Mixer/Pre-Amplifier
CAM2
Product
Dimensions Weight
11-3/8" W x 2-5/8" H x 7-3/8" D 3 lb.
www
.bogen.com
50
MIXERS
MIXERS
Model
CAM8PRO
CAM2
Inputs
8
5
(4 MIC,
1 AUX)
MIC Equiv.
Input
Noise
-129 dBV
-123 dBV
MIC/AUX
Input
Impedance
3.5k/20k
ohms
600/10k
ohms
Signal-To-
Noise
Ratio
90 dB
75 dB
Crosstalk
(adjacent
channels)
> -90 dB
> -90 dB
For
Product
Info, See:
Page 49
Above
Output
Impedance
220-ohm
unbalanced,
440-ohm
balanced
140
ohms
Phantom
Power/
Voltage
Frequency
Response
±1 dB,
20 Hz-20 kHz
±1 dB,
20 Hz-20 kHz
Clipping
Indicator/
Channel
Compressor/
Limiter
Output Level
Meter
Bridging
Input
●
●
●
●
●
CAM MIXERS SELECTION CHART
(8 segments)
●
(5 segments)
30V DC
12V DC