Pioneer DEH-6200BT - Manual (Page 9)

Using preset tuning buttons
1 When you find a station that you want to store in
memory, press one of the preset tuning buttons
(
1 to 6) and hold until the preset number stops
flashing.
2 Press one of the preset tuning buttons (1 to 6) to
select the desired station.
Using the preset screen
1 Press
to switch to the preset screen.
2 Use M.C. to store the selected frequency in the
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.
Displaying text information
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
Selecting the desired text information
1 Press
/ DISP/SCRL.
Program service name —PTY information—Fre-
quency
Notes
! RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
! PTY information and the frequency appear on
the display for eight seconds.
Advanced operations using
special buttons
Receiving traffic announcements
Regardless of the source you are listening to, you can
receive traffic announcements automatically with TA
(traffic announcement standby).
1 Tune in to a TP or enhanced other network’s TP
station.
2 Press TA/NEWS to turn traffic announcement
standby on or off.
3 Use M.C. to adjust the TA volume when a traffic
announcement begins.
The newly set volume is stored in the memory
and will be recalled for subsequent traffic an-
nouncements.
4 Press TA/NEWS while a traffic announcement is
being received to cancel the announcement.
The tuner returns to the original source but re-
mains in the standby mode until
TA/NEWS is
pressed again.
Using news program interruption
When a news program is broadcast from a PTY code
news station, the unit automatically switches to the
news broadcast station. When the news program
ends, reception of the previous program resumes.
1 Press TA/NEWS and hold to turn on or off news
program interruption.
A news program can be canceled by pressing
TA/
NEWS.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Regional (regional)
En
9
Section
02
Operating
this
unit
Operating this unit