Initial settings adjusting initial settings, Selecting the display language, Setting the clock – Pioneer DEH-P88RS User Manual

Page 70: Initial, G the reverse mode, Initial settings, Adjusting initial settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.

1 Function display

Shows the function status.

Press SOURCE and hold until the unit

turns off.

Press MULTI-CONTROL and hold until

Language select appears in the display.

Turn MULTI-CONTROL to select one of

the initial settings.
Turn

MULTI-CONTROL clockwise to switch be-

tween the functions in the following order:
Language select (language selection)

—Clock

(clock)

—Off Clock (off clock)—FM step (FM

tuning step)

—Auto PI seek (auto PI seek)—

Warning tone (warning tone)

—

Face auto open (face auto open)

—AUX1

(auxiliary input 1)

—AUX2 (auxiliary input 2)—

Dimmer (dimmer)

—Brightness (brightness)

—Digital ATT (digital attenuator)—
Audio Reset (audio reset)

—Mute (sound

muting/attenuation)

—Internal AMP (power

amp setting)

—Demonstration (feature demo)

—Reverse mode (reverse mode)—Ever-scroll
(ever scroll)
Use the following instructions to operate each
particular setting.

# You can also switch between the functions in
reverse order by turning

MULTI-CONTROL coun-

terclockwise.
# To cancel initial settings, press BAND.

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.

Use MULTI-CONTROL to select

Language select.
Language select appears in the display.

Press MULTI-CONTROL to select the lan-

guage.
Each press of

MULTI-CONTROL selects lan-

guages in the following order:
English

—Français—Italiano—Español—

Deutsch

—Nederlands—РУССКИЙ

Setting the clock

Use these instructions to set the clock.

Use MULTI-CONTROL to select Clock.

Clock appears in the display.

Push MULTI-CONTROL left or right to

select the segment of the clock display you
wish to set.
Pushing

MULTI-CONTROL left or right will se-

lect one segment of the clock display:
Hour

—Minute

As you select segments of the clock display
the segment selected will blink.

Initial Settings

Section