Additional information, Troubleshooting, Error messages – Pioneer DEH-2200UBB User Manual
Page 14: En g l is h, Troubleshooting error messages

14
EN
G
L
IS
H
Additional Information
Troubleshooting
Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to note
the error message.
Built-in CD Player
Symptom
Cause
Action
The display automatically
returns to the ordinary display.
You did not perform any
operation within about 30
seconds.
Perform operation again.
The repeat play range
changes unexpectedly.
Depending on the repeat play
range, the selected range may
change when selecting
another folder or track, or
when fast forwarding/
reversing.
Select the repeat play range
again.
A subfolder is not played back. Subfolders cannot be played
when FOLDER (folder repeat)
is selected.
Select another repeat play
range.
NO XXXX appears when a
display is changed (e.g., NO
TITLE).
No text information embedded Switch the display or play
another track/file.
The unit is malfunctioning.
There is interference.
You are using a device, such
as a cell phone, that transmits
electromagnetic waves near
the unit.
Move electrical devices that
may be causing the
interference away from the unit.
Message
Cause
Action
ERROR-11, 12, 17, 30
Dirty disc
Clean disc.
Scratched disc
Replace disc.
ERROR-10, 11, 12, 15,
17, 30, A0
Electrical or mechanical
Turn the ignition switch OFF and
back ON, or switch to a different
source, then back to the CD
player.
ERROR-15
The inserted disc is blank
Replace disc.
ERROR-22, 23
Unsupported CD format
Replace disc.
Built-in CD Player
USB storage device
Message
Cause
Action
FRMT READ
There is sometimes a delay
between the start of playback and
when you start to hear any sound
Wait until the message disappears
and you hear sound.
NO AUDIO
The inserted disc does not
contain any playable files
Replace disc.
SKIPPED
The inserted disc contains DRM
protected WMA files
Replace disc.
PROTECT
All the files on the inserted disc
are embedded with DRM
Replace disc.
Message
Cause
Action
NO DEVICE
When plug and play is off, no USB
storage device is connected.
• Turn the plug and play on.
• Connect a compatible USB
storage device.
FRMT READ
There is sometimes a delay
between the start of playback and
when you start to hear any sound
Wait until the message disappears
and you hear sound.
NO AUDIO
No songs
Transfer the audio files to the USB
storage device and connect.
The connected USB storage
device has security enabled
Follow the USB storage device
instructions to disable the security.
SKIPPED
The connected USB storage
device contains WMA files
embedded with Windows Media™
DRM 9/10
Play an audio file not embedded
with Windows Media DRM 9/10.
PROTECT
All the files in the USB storage
device are embedded with
Windows Media DRM 9/10
Transfer audio files not embedded
with Windows Media DRM 9/10 to
the USB storage device and
connect.
N/A USB
The USB storage device
connected to is not supported by
this unit.
Connect a USB Mass Storage
Class compliant device.
CHECK USB
The USB connector or USB cable
has short-circuited.
Check that the USB connector or
USB cable is not caught in
something or damaged.
The connected USB storage
device consumes more than 500
mA (maximum allowable current).
Disconnect the USB storage
device and do not use it. Turn the
ignition switch to OFF, then to
ACC or ON and then connect only
compliant USB storage devices.
MAN-DEH2200UB-GB.fm Page 14 Tuesday, October 27, 2009 3:21 PM