Pioneer GEX-P5700TVP - Manual (Page 8)

Remote control
This units supplied remote control is mainly
for use by rear seat passengers. When using,
point at the remote control sensor.
1 CHCALL button
SRC : OSD ON mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
front and rear display.
SRC : OSD OFF mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
rear display.
STAND ALONE mode
Press to display the current channel and
other settings (Confirming current channel
and other settings on page 17).
2 BAND button
SRC : OSD ON mode
Not used. Alternatively, use BAND on the
head unit.
SRC : OSD OFF mode
Not used. Alternatively, use BAND on the
head unit.
STAND ALONE mode
Press to select among two TV bands and to
cancel the control mode of functions.
3 MENU button
SRC : OSD ON mode
Press to display the menu screen on the
front and rear display.
SRC : OSD OFF mode
Press to display the menu screen on the
rear display.
STAND ALONE mode
Press to display the area group setting
screen (Selecting the area group on page
16).
4 a/b/c/d buttons
SRC : OSD ON mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
SRC : OSD OFF mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
STAND ALONE mode
Press to do manual seek tuning and preset
tuning.
5 POWER button
SRC : OSD ON mode
Press to turn the rear display on or off when
the TV is not selected as a source.
SRC : OSD OFF mode
Press to turn the rear display on or off when
the TV is not selected as a source.
STAND ALONE mode
Press to turn this unit on or off.
Other remote controls
You can also perform operations with the re-
mote controls shown below.
2
5
3
1
4
Whats What
En
8
Section
03