Built-in player 8, Playing a disc 8, Built-in player – Pioneer DEH-281MP User Manual

Page 8: Operating this unit, Playing a disc

Built-in Player

Playing a disc

When playing a CD

3 4

When playing an MP3/WMA/WAV disc

1 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

2 Tracknumber indicator

Shows the track (file) currently playing.

! If a track number 100 or more is selected,

d will light up above the last two digits

of the track number.

3 Folder number indicator

Shows the number of folder currently play-

ing.

4 MP3 indicator

Shows when an MP3 file is playing.

5 WMA indicator

Shows when a WMA file is playing.

1 Insert a CD (CD-ROM) into the disc load-

ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.

2 Press a or b to select a folder when

playing an MP3/WMA/WAV disc.

# You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.

3 To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 10.)

4 To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

Notes

! The built-in CD player plays one standard, 12-

cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! If an error message such as ERROR-11 is dis-

played, refer to Error messages on page 14.

! There is sometimes a delay between starting

up CD playback and the sound being issued.
When being read, FRMTREAD is displayed.

! When playing discs with MP3/WMA/WAV files

and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.

! If you have switched between playback of

MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.

! The built-in CD player can play back an MP3/

WMA/WAV file recorded on CD-ROM. (Refer
to page 14 for files that can be played back.)

Operating this unit

Section