beautypg.com

Disc 22, Pausing cd playback, Selecting the search method – Pioneer DEH-P5500MP User Manual

Page 22: Searching every 10 track in the current disc, Built-in cd player

background image

2 Press a to turn scan playon.

SCAN :ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired track press

b to turn scan playoff.

SCAN :OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.

Note

After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

2 Press a to turn pause on.

PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.

2 Press c or d to select the search meth-

od.

Press c or d until the desired search method

appears in the display.

! FF/REV Fast forward and reverse
! ROUGH Searching every 10 track

Searching every 10 track in

the current disc

If a disc contains over 10 tracks, you can

search every 10 track. When a disc contains a

lot of tracks, you can roughly search the track

you want to play.

1 Select the search method ROUGH.

Refer to Selecting the search method on this

page.

2 Press and hold c or d to search every

10 track in a disc.

# If a disc contains less than 10 tracks, pressing
and holding d recalls the last track of a disc.
Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, press-
ing and holding d recalls the last track of a disc.
# If a disc contains less than 10 tracks, pressing
and holding c recalls the first track of a disc.
Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, press-
ing and holding c recalls the first track of a
disc.

Built-in CD Player

En

22

Section

06

HHHHHHHHHHHHHH

This manual is related to the following products: