Pioneer DDJ-SZ - Manual (Page 11)

En 11
English
Operation
Connections
1 Connect headphones to one of the [PHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
Powered speaker, etc.
To output the sound from the [BOOTH] terminals, connect speak-
ers or other devices to the [BOOTH] terminals.
For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
USB cable
(included)
This product satisfies electromagnetic noise
regulations when it is connected to other equipment
through shielded cables and connectors.
Use only the furnished accessory connecting cables.
D44-8-2_A1_En
4 Turn on the computer’s power.
5 Connect the power cord.
To power outlet
Power cord
(included)
6 Press the [ 1] switch on this unit’s rear panel to turn
this unit’s power on.
Turn on the power of this unit.
For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
When a microphone, DJ player or other external device is con-
nected to input terminals, the power of that device also turns on.