Pioneer CNSD-130FM - Manual (Page 18)

The navigation system
upgrade process
1 Check the device number of your naviga-
tion system.
= For details of the operation, refer to
Checking the device number on this
page.
j
2 Get the password for authentication.
= For details, refer to Getting the password
for authentication on this page.
j
3 Upgrade the software programme of your
navigation system.
= For details of the operation, refer to Up-
grading the software programme and the
map database on the next page.
j
4 Check whether the upgrade was done prop-
erly.
= For details of the operation, refer to
Checking whether the upgrade was done
properly on page 20.
j
5 Update the Bluetooth firmware.
= For details of the operation, refer to Up-
dating the Bluetooth wireless technology
software on page 20.
Preparation for upgrade
Checking the device number
First, check your device number
(DEVICE NUMBER, displayed such as
Device # or Device Number) of your naviga-
tion system for later procedures. To display the
device number, do the following.
1 Touch [Menu] on the map screen.
The
“Navigation Menu” screen appears.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Service Info].
The
“Service Information Screen” screen ap-
pears.
4 Write down your device number
(Device Number) onto the supplied Media
Number Card (MEDIA NUMBER CARD) to
avoid mistakes.
p Also write down “Version” information
which would be used to confirm completion
of the update.
Getting the password for
authentication
For upgrade, an unique password issued on-
line is necessary. Access the website with your
PC and get your password.
The following information is required.
! Media Number (MEDIA NUMBER) printed
on supplied Media Number Card
(MEDIA NUMBER CARD)
! Device Number (DEVICE NUMBER) of your
navigation system
1 Access on the following website to
issue your password.
http://www.pioneer.eu/UnlockNavgate
For issuing the password, follow the instruc-
tion on the website.
Engb
18
Chapter
04 Instructions for upgrading