Connecting the loudspeakers, Single-wire connections – Pioneer TAD-R1 User Manual
Page 12
12
TAD Reference One Owner’s Manual
Single-Wire Connections
For single-wire connections, connect the high- and low-frequency sections of the crossover network with the
shorting link that was included with this unit, then connect the (+) wire from your amplifier to either red binding
post and the (-) wire from your amplifier to either black binding post, as shown in Figure 8.
CONNECTING THE LOUDSPEAKERS
HF
SPEAKERS OUTPUT
TAD Reference One
e
Terminal Panel
Terminal Panel
Amplifier
(rear)
(one channel shown)
(
h
l h
)
Shorting links
Figure 8. Connecting a TAD Reference One
loudspeaker in a single-wired system.
TAD-R1_En.book 12 ページ ２００６年１２月４日 月曜日 午後２時４２分