beautypg.com

Function and operation 27, Audio adjustments, Function and operation – Pioneer MVH-8200BT User Manual

Page 27: Operating this unit

background image

You can set

Auto Answer and Ring Tone from this

menu. For details, refer to Function and operation on
this page.

Connection (phone connection)

Operate the Bluetooth telephone connection menu.
Refer to Connection menu operation on page 25.

Function and operation

1

Display Phone Function.

Refer to

Phone Function (phone function) on

the previous page.

2

Press M.C. to display the function

menu.

3

Turn M.C. to select the function.

After selecting, perform the following proce-
dures to set the function.

Auto Answer (automatic answering)

1 Press M.C. to turn automatic answering on or off.

Ring Tone (ring tone select)

1 Press M.C. to turn the ring tone on or off.

Audio Adjustments

1

Display the audio menu.

Refer to Basic menu operations on page 10.

2

Turn M.C. to select the audio function.

After selecting, perform the following proce-
dures to set the audio function.

Fader/Balance (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Push M.C. up or down to adjust the front/rear

speaker balance.
Adjustment range (front/rear):

Front 15 to Rear

15

3 Push M.C. left or right to adjust the left/right

speaker balance.
Adjustment range (left/right):

Left 15 to Right 15

! Select F/R 0 when only using two speakers.

! When the rear output setting and preout setting

are

Subwoofer, you cannot adjust front/rear

speaker balance.

Sonic Center Control (sonic center control)

Sound that is suited for the listening position can ea-
sily be created with this function.
1 Press M.C. to display the setting mode.

2 Push M.C. left or right to select a listening posi-

tion.
Adjustment range:

Left:7 to Right:7

Auto EQ (auto-equalizer on/off)

The auto-equalizer is an equalizer curve created by
auto EQ (refer to Auto EQ (auto-equalizing) on page
32).
You can turn the auto-equalizer on or off.
1 Press M.C. to turn the auto-equalizer on or off.
You cannot use this function if auto EQ has not been
carried out.

Graphic EQ (equalizer adjustment)

En

27

Section

03

Operating

this

unit

Operating this unit

This manual is related to the following products: