Pioneer AVIC-F10BT - Manual (Page 11)

Installing additional files for
voice guidance (TTS files)
TTS file is used to read out the street name in
the route guidance by navigation system. If
the latest TTS file is available, you can replace
the current TTS file with the latest one.
= For details of the operation, refer to the Op-
eration Manual supplied with your naviga-
tion system.
1 Use your PC to copy the folder named
“Voice” onto the top-most directory of the
SD memory card.
The
“Voice” folder is stored on the supplied
CD-ROM. Use your PC to copy it.
2 Insert an SD memory card into the SD
card slot.
3 Touch [Voice Language].
The
“Voice Language Selection” screen ap-
pears.
4 Touch [Setup Voice].
The
“Voice Language Setup” screen appears.
5 Touch [Change Voice Language].
The
“Voice Language Selection (SD)” screen
appears.
6 Touch the desired language.
After a while, loading completes and the
“Re-
gional Settings
” screen returns.
7 Touch [OK] on the
“Regional Settings”
screen.
A message confirming whether to restart the
navigation system appears.
8 Touch [OK].
The navigation system restarts.
# If you press the MODE or HOME button, the
setting procedure is cancelled.
Engb
11
Chapter
03
Activation
proc
edures
Activation procedures