Pioneer DEH-P7400MP - Manual (Page 49)

Other Functions Additional Information
En 49
Storing and recalling dynamic label
You can store data from up to six dynamic label
transmissions at buttons
1–6 .
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on page 48.
2 Press any of 1–6 and hold to store the
selected dynamic label.
The memory number will display and the
selected dynamic label has been stored in mem-
ory.
The next time you press the same
1–6 button in
the dynamic label display the stored text is
recalled from memory.
CD player and care
• Use only CDs that have either of the two
Compact Disc Digital Audio marks as show
below.
• Use only normal, round CDs. If you insert
irregular, non-round, shaped CDs they may
jam in the CD player or not play properly.
• Check all CDs for cracks, scratches or warped
discs before playing. CDs that have cracks,
scratches or are warped may not play prop-
erly. Do not use such discs.
• Avoid touching the recorded (non-printed
side) surface when handling the disc.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and do not
expose the discs to high temperatures.
• Do not attach labels, write on or apply chemi-
cals to the surface of the discs.
• To clean dirt from a CD, wipe the disc with a
soft cloth outward from the center of the disc.
• If the heater is used in cold weather, moisture
may form on components inside the CD
player. Condensation may cause the CD
player to not operate properly. If you think that
condensation is a problem turn off the CD
player for an hour or so to allow the CD player
to dry out and wipe any damp discs with a soft
cloth to remove the moisture.
• Road shocks may interrupt CD playback.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
11
Section