Blaupunkt C51 - Manual (Page 14)

14
Skipping Tracks (S-CPS)
To skip to the next or a later track
➮
Press the button
:
one or more
times.
“CPS FF” and the number of tracks to
be skipped appear in the display. The
tape fast forwards to the next track or
the chosen later track.
To skip track backwards
➮
Press the button
:
one or more
times.
“CPS FR” and the number of tracks to
be skipped appear in the display. The
tape is rewound to the start of the
present track or the desired earlier track.
Playing a Track Repeatedly
➮
Press button 4 RPT
>
.
The present track is repeated. RPT
shows in the display. While the tape is
being rewound after the end of the track,
“REPEAT TRCK” appears in the display.
To stop repeating the track
➮
Press button 4 RPT
>
again.
Play continues as normal. RPT disap-
pears from the display.
Sampling All the Tracks on a
Cassette (SCAN)
➮
Hold down the OK button
;
for
longer than two seconds.
“CAS SCAN” appears in the display.
Samples from all the tracks on the tape
are played in ascending order.
To halt the scan
➮
Press the OK button
;
a second
time.
The track that is currently being sam-
pled will continue playing.
Note:
●
The duration of samples can be
adjusted. Refer to the section on
“Setting Sample Time” under “Ra-
dio Operation”.
●
To use the S-CPS, RPT and SCAN
functions, there must be a pause of
at least three seconds between the
tracks on the cassette.
Fast Winding
Fast forward
➮
Press the button
:
.
“FORWARD” appears in the display.
Fast rewind
➮
Press the button
:
.
“REWIND” appears in the display.
Stopping fast winding
➮
Press the OK button
;
.
Play continues.
Note:
●
While the tape is being fast wound,
the last radio station tuned in can
be listened to. This requires the
“Radio monitor” function to be
switched on.
Pausing During Play
To interrupt tape play
➮
Press button 3
>
.
CASSETTE MODE