Blaupunkt DJ52 - Manual (Page 19)

41
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Skipping Blank Tape
You can automatically skip sections of
blank tape that last longer than 10 sec-
onds. This requires the blank skip func-
tion to be activated.
Note:
●
The blank skip can only be set if a
cassette is being played.
Switching Blank Skip On / Off
➮
Press the MENU button
8
.
➮
Press the or button
:
until
“BLANK SKIP” appears in the dis-
play.
➮
Press the or button
:
to
switch the blank skip function on or
off.
➮
Press the MENU button
8
or OK
;
twice.
Selecting Tape Type
If you are playing a “Metal” or “CrO
2
”
tape, you should set the tape type se-
lector to “MTL ON”.
To select the tape type
➮
Press button 3 MTL
>
.
Either “MTL ON” or “MTL OFF” will ap-
pear briefly in the display.
Dolby* B Noise Reduction
You should switch on the Dolby func-
tion whenever you play tapes recorded
using the Dolby B process.
➮
Press button 6
>
.
When the Dolby function is switched on,
shows in the display.
*Noise reduction system manufactured un-
der licence from Dolby Laboratories. The
word Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
CASSETTE MODE