Vitek VT-1731 - Manual (Page 3)

I MPORTANT SAFEGUARDS
1. Use the heater on flat surfaces not titling or upsides down.
No use underneath socket directly.
2. Do not use you heater in the presence of explosive or flam
mable substance.
3. It is absolutely necessary ensure the following:
The socket is not used to the heater and other high power
electrical appliance at a time.
The cord is rated for at least 10 AMPS
Tight connection between plug and socket so as to avoid
the overheating plug and malfunction.
Unplug heaters by grasping plug and pulling it from the
socket. Never yank on cord.
Carefully use when children, old man, disabled man inside
solely. No use when no supervision.
Our factory, if damaged manufactures the power cord and
plug; Return the heater to the approved service Agent for
changing.
Caution: Do not drape anything on your heater when in use.
OPERATING INSTRUCTIONS
1. Plug into any 230V, 50HZ, AC source.
2. Your heater is equipped with a 5 position control switch
SYMBOL FUNCTION
0 OFF
FAN ONLY
800 WATTS
ENGLISH
3 10
1731.qxd 07.07.03 14:47 Page 6