Olympus DP211 - Manual (Page 7)

7
Troubleshooting
Q1: The power cannot be turned on.
A1: • Batteries are exhausted.
• Batteries are inserted incorrectly.
Check
= and - before inserting new
batteries.
• Terminals are soiled.
Clean them with a dry cloth.
Q2: Nothing happens when a button is
pressed.
A2: • The POWER switch is set to [OFF/HOLD]
position.
Slide the POWER switch to the [ON]
position.
Q3: No sound or quiet sound is heard from the
speaker while playing back.
A3: The earphone plug is plugged into the
recorder.
The volume is set to the low level.
Q4: Recording is not possible.
A4: By pressing the
REC ( -) button:
• Check if the display shows [Memory Full].
• Check if the display shows [Maximum
File Size is reached].
Delete unnecessary files before recording.
A maximum of 99 files can be recorded in a
day.
Q5: The playback speed is too fast (slow).
A5: The recorder is set to fast (slow) Playback.
Use the PLAY SPEED button to set to
normal playback.
Specifications
Recording medium:
Built-in flash memory (2GB)
Overall frequency:
HQ mode: 70 to 7,900 Hz
SP mode: 70 to 4,700 Hz
Guide to recording times:
HQ mode: Approx. 98 h.
SP mode: Approx. 202 h.
Microphone:
Electret Condenser Microphone (monaural)
Speaker:
Built-in ø 36 mm round dynamic speaker
Maximum power:
180 mW
Earphone jack (monaural):
ø 3.5 mm diameter, impedance 8 Ω or more
Power supply:
Two AAA (LR03) batteries
Continuous battery:
Guide to alkaline battery life
Recording mode HQ SP
During recording
mode approx.
67 h. approx.
80 h.
During playback mode
(Built-in speakers) approx.
21 h. approx.
21 h.
During playback mode
(Earphone) approx.
45 h. approx.
49 h.
Dimensions:
95 (L) mm x 50 (W) mm x 18.2 (T) mm
(without protrusions)
Weight:
78 g (including battery)
Operating temperature:
0°C - 42°C
• Battery life is measured by Olympus. It varies
greatly according to the type of batteries
used and the conditions of use.
• Your recorded contents are for your personal
use or pleasure only. It is prohibited to record
copyrighted material without permission of
the copyright holders according to copyright
law.
• Specifications and design are subject to
change without notice for improvement of
performance.
“CE” mark indicates that this
product complies with the
European requirements for safety,
health,environment and customer
protection.
This symbol [crossed-out wheeled
bin WEEE Annex IV] indicates
separate collection of waste electrical
and electronic equipment in the EU
countries. Please do not throw the
equipment into the domestic refuse.
Please use the return and collection
systems available in your country for
the disposal of this product.
Applicable Product : DP-211
This symbol [crossed-out wheeled
bin Directive 2006/66/EC Annex
II] indicates separate collection of
waste batteries in the EU countries.
Please do not throw the batteries
into the domestic refuse. Please use
the return and collection systems
available in your country for the
disposal of the waste batteries.