Set the low cut filter, Listening while audio is recorded, Microphone sensitivity – Olympus LS-5 User Manual

Page 27: Recording

t R

ord

ing

EAR jack

Set the Low Cut Filter

The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly. This function can reduce
noise from air conditioners, projectors and other
similar noises.

Slide the

LOW CUT ON/OFF switch and select

[

ON] or [OFF].

[

ON]:

Enables the Low Cut Filter function.

[

OFF]:

Disables this function.

Listening While Audio is Recorded

If you start recording after inserting the earphone
into the

EAR jack on the recorder, you can hear

the sound being recorded. The recording monitor
volume can be adjusted by using the

VOLUME

dial.

Connect the earphone to the

EAR jack on

the recorder.

• After recording has started, you can hear

the sound being recorded through the
earphone. If the earphone is connected,
no sound will come from the speaker.

Notes

• Recording level cannot be controlled using the

volume button.

• When using the earphones, do NOT set the

volume too high. Listening at very high volume
may lead to hearing loss.

• Do not place earphones near a microphone as

this may cause feedback.

• When the external speaker is connected while

recording, there is a risk that audio feedback
will occur. It is recommended that you use
earphones for the recording monitor, or turn
[

Rec Monitor] to [Off] while recording (☞ P.41,

P.44).

• When [

Rec Monitor] is set to [Off] no sound

will come out of the earphones while you are
recording (☞ P.41, P.44).

Microphone Sensitivity

Microphone sensitivity is adjustable to meet
recording needs.

Slide the

MIC SENSE HIGH/LOW switch and

select [

HIGH] or [LOW].

Recording