Olympus VN-405PC - Manual (Page 16)

2
16
EN
a
b
c
d
R
e
cording
1 Select the recording folder
(
☞ P.15).
2 Press the REC (
s) button to start
recording.
• Turn the microphone in the direction
of the source to be recorded.
Before starting recording, select a folder
among [
&] to [*]. These five folders can be
selectively used to distinguish the kind of
recording; for example, Folder [
&] might
be used to store private information, while
Folder [
'] might be dedicated to holding
business information.
Recording
• [Rec Mode] cannot be changed in
the recording standby mode or while
recording. Configure this while the
recorder is stopped (
☞ P.29).
a Recording mode
indicator
b Elapsed recording time
c Remaining recording
time
3 Press the STOP (
4) button to
stop recording.
d File length
Notes
• To ensure recording from the beginning,
start recording after you see the display
and the LED indicator light on.
• When remaining recording time is less
than 60 seconds, the LED indicator light
starts flashing. When the recording time
is decreasing to 30 or 10 seconds, the
light flashes faster.
• [Folder full] will appear when the
recording cannot be made any further.
Select other folder or delete unnecessary
files before recording (
☞ P.25).
• [Memory full] will appear when the
memory is full. Delete unnecessary files
before recording any further (
☞ P.25).
For VN-406PC:
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [Internal memory]
or [microSD card] so that there is no
mistake (
☞ P.34).
• If a recording is made in stereo modes
([192 kbps] or [128 kbps]), it will be a
monaural recording through the built-in
microphone, and the same audio will be
recorded to both Left channel (Lch) and
Right channel (Rch).
About recording