Olympus PT-EP06L - Manual (Page 26)

EN 25
En
9. Appendix
Specifications
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PT-EP05L/06L
O-ring: POL-EP03
Silicone grease: PSOLG-2
Silica gel: SILCA-5S
LCD hood: PFUD-EP05
Body cap: PBC-EP01
Diffuser: PTDP-EP05
Antireflective ring: POSR-EP05
Flash window cover: PFC-EP05
O-ring remover: PTAC-05
Optional accessories
Silicone grease: PSOLG-3
Underwater optical fiber cable: PTCB-E02
Bracket: PTBK-E01, PTBK-E02
Short arm: PTSA-02/PTSA-03
Underwater flash: UFL-2, UFL-1
Underwater macro conversion lens: PTMC-01
Underwater wide conversion lens: PTWC-01
Zoom gear: PPZR-EP02
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
Supplied accessories can be purchased. Products of other model types than those describing above cannot be
used.
Underwater case PT-EP05L PT-EP06L
Supported camera E-PL3 E-PM1
Pressure resistance Depth of down to 45 m (147 feet)
Main materials Main body: Polycarbonate
O-ring: Silicone rubber
Light batteries 2 AAA batteries (Alkaline / NiMH)
Lighting time Approx. 4 hours in continuous use (when using alkaline batteries)
Dimensions Width 175 mm × height 149 mm ×
depth 156 mm
Width 175 mm × height 149 mm ×
depth 152 mm
Weight Approx. 1,110 g (camera and accessories not included)
Weight under water Approx. –30 g (in the freshwater)
(including camera, lens, zoom gear, antirefletive ring, batteries and media
card)
PT-EP05L_06L_EN.Book Page 25 Friday, July 15, 2011 10:30 AM