Troubleshooting, En-50 – Olympus mrobe 100 User Manual
Page 50
Addit
io
n
al inf
o
rma
tion
Troubleshooting
EN-50
Troubleshooting
Before sending the product for repair, refer to the following checklist to resolve the problem. If the problem
persists, contact your nearest Olympus service center.
In addition, be sure to back up the data in your m:robe before sending this product for repair or service. Writing
to the hard disk or deleting data etc., may be necessary during the repair or service. Due to copyright
restrictions, we cannot copy stored data for repair or service. Restoring the data is not possible. We also
recommend backing up your data often, by synchronization, to prevent data loss problems.
Problem
Cause
Resolution
Page
The power cannot be
turned on.
The HOLD function is set
to ON.
Slide back the HOLD
switch to release the
HOLD function.
gpage 28
The player turns off
automatically.
OFF TIMER is set.
The POWER is turned off
automatically after the
setting time of OFF
TIMER has elapsed. Set to
“OFF” to disable the OFF
TIMER setting.
g page 46
The Auto Off function is
activated.
3 minutes after playback
stops, the power turns off
automatically.
Press the POWER to turn
the device on.
g page 27
Nothing is on the display.
The battery is empty.
Charge the battery with the
supplied AC adapter.
gpage 18
The display is not clear.
The battery is empty.
Charge the battery with the
supplied AC adapter.
gpage 18
The LCD brightness setting
is too low.
Adjust settings of the LCD
CONTRAST.
gpage 46
The display and the LED
lights are turned off.
The backlight is set to turn
off.
Set the desired time or
change “BACKLIGHT” to
“ON”.
gpage 46
The display does not turn
on.
The HOLD function is set
to ON.
Slide back the HOLD
switch to release the
HOLD function.
gpage 28
Inro 0_E.book Page 50 Wednesday, November 17, 2004 3:51 PM