Olympus DS 2 - Manual (Page 26)

26
4
Playing
* 1 The above-mentioned playback functions and the insertion of index mark( ☞ P.35) are also enabled
during fast/slow playback as well as normal playback.
* 2 When pressing the FF or REW button continuously while stopped, the cue of the file start position and
previous file end position( ☞ P.24) will be executed continuously (skip/reverse skip).
* 3 When the index mark is shown in the middle of a file, it will stop temporarily in the position of the index mark.
* 4 When the skip interval is set to file skip in the menu setting. It is set to file skip in the initial setting.
* 5 When the index mark is shown in the middle of a file, playback starts at the position of the index mark.
* 6 When the skip interval is set at other than file skip in the menu setting.
* 7 When playback was set to “OFF” previously in the menu setting.
* 8 When the index mark is shown before the set time the playback will start in the position of the index mark.
* 9 If both of the skip interval and the previous playback are set, the time setting for previous playback
overrides the time setting for skip interval.
....................................................................................................................................................
Notes
• When the noise cancel function ( ☞ P.30) is set to “LOW” or “HIGH”, the playback speed cannot be set.
• When the previous playback is set, the FF button is disabled and will not skip to the cue of the file start
position or the index mark position.
Playing