Scarlett SC-1158 - Manual (Page 4)

4
TIMER OPERATION
· The timer face consist s of two numbered bands.
· To use the heater continuously rotate the timer dial until the
pointer is opposite.
· Check the adapt band to adjust your.
· To use the timer rotate the timer dial to the time you expect to
cut off. At the time the heater will be cut off.
· For example: suppose the power frequency is 50 hz. Rotate the
timer dial until the pointer is opposite of the outer band. The
heater will be cut off after four.
CLEAN AND CARE
· The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this
may result the radiating efficient.
· Unplug from the power supply and allow the appliance to cool down.
· Wipe out with a soft damp cloth. Do not use detergent or abrasives.
· Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty,
because of damage of the paint coat.
STORAGE
· Ensure the oil heater is completely cool.
· Store the appliance in a cool, dry place.
SPECIFICATION
Power supply 230 V, 50 Hz
Power 2000 W
Net/ Gross weight 12.0 kg/13.40 kg
Radiating fins quantity 9
Gift box dimension (L x W x H) 465 mm x 145 mm x 693 mm
0
1
2
3
4
5
6 7
8
9
10
11
12
0
1
2
3
4
5
6 7
8
9
10
12