Blaupunkt AUGSBURG RCR 87 - Manual (Page 17)

34
LO/DX To adjust the seek tuning
sensitivity for local or distant
stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
You can select separate sen-
sitivity levels for AM and FM.
To quit the DSC programming mode
and store the adjustment:
•
Press DSC.
The DSC programming mode will be auto-
matically quit 8 seconds after having made
the last adjustment.
volume adjusted for the pro-
gram is lower.
If the program volume is
higher than the TA VOL lev-
el, the traffic report will be
played slightly louder.
LOUDNESS When listening at a low lev-
el, the Loudness function
creates a more natural
sound by boosting the low
frequency range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
STEREO/MONO
You can select between
stereo or mono sound.
AM ON/OFF (Verona RCR 127)
You can deactivate one or
both AM bands (MW/LW) in
order to reduce the number
of bands for selection with
TS/BND.
selectable:
AM ON – all bands
MW OFF – LW, FM
LW OFF – MW, FM
AM OFF – FM
LEARN KC To “train” a second Key-
Card.
Please read the information
in chapter “KeyCard theft
protection system - Training
a second KeyCard”.
LED ON/OFF You can choose between
LED ON or LED OFF. With
LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
BEEP Acknowledgement tone for
all functions which require a
button to be pressed for
more than 1 second.
The volume can be adjusted
from between 0 to 9.
(0 = off)
TA VOL To adjust the traffic an-
nouncement and beep tone
volume from between 0 to
63.
The message will then come
through at this volume, if the
Augs87/Es/Ver127 gb® 15.05.2002, 11:19 Uhr 34