Stand-by switching – Barco Nio Fusion 4MP User Manual
Page 19
Display information
19
into edit mode. This is indicated by the scroll bar becoming
longer.
Figure 3: Setting is selected
Figure 4: Edit mode is active
Use Up
or Down to change the value. Use Enter
to
confirm the change.
Changes are saved automatically after confirming.
6.
Some items in the menus cannot be changed. They are read-
only values, displayed in light gray.
Tip:
While you are adjusting a value:
• Touching Up and Down at the same time resets to the last
stored value.
• Touching Up and Enter at the same time selects the maximum
value.
• Touching Down and Enter at the same time selects the
minimum value.
Stand-by switching
To switch from on state to stand-by:
1.
Touch the Stand-by
touch key.
SETTINGS
DPMS
On
Power LED
On
User Controls
On
EXIT
SETTINGS
DPMS
On
Power LED
On
User Controls
On
EXIT