AEG IMS 4452 - Manual (Page 31)

English
31
6 VOL+/VOL- buttons (volume)
7 RPT (repeat) button
8 OK button
9 MUTE button
10
(play/pause) button
Accessories (no image)
Mains power cord
AC adapter
Information about the application
Through the Apple Store we provide you with a free applica-
tion with the following features.
Internet Radio
This will give you access to a variety of radio sta-
tions that are distributed over the Internet.
Weather Display/Prediction
Let you view the latest weather data.
Alarm
To set up to four individual alarms.
Audio Media Player
Let you create a music playlist.
Photo & Album Function
Here you can view a slideshow of your images.
Equalizer
Let you set an individual sound.
NOTE:
Depending on the provider, downloading the app may
require payment. For details concerning the application, go
to the download portal on our website “www.sli24.de”.
First Use of the Device/Introduction
NOTE:
• The device is operated primarily with the remote con-
trol. Thus the descriptions refer to the buttons on the
remote control. Some buttons are also on the device.
Buttons with the same name have the same function.
• The buttons on the device are touch buttons. Touch the
keys lightly with a finger to perform the function.
• Select a proper place for the device. A dry, level and slip-
proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
Power supply
• Connect the power cord to the AC adapter. Connect the
AC adapter to the DC 12 V jack on the rear of the device.
• Insert the grid plug into a properly installed three prong
socket with 230 V, 50 Hz.
• Make sure the grid voltage corresponds to the figures on
the rating plate.
CAUTION:
• The included AC adapter may only be used with this
device. Do not use it for other devices.
• Use only an AC adapter with 12 V ( ). A different
AC adapter may damage the unit.
NOTE:
Disconnect from mains power supply during longer periods
of non-use.
Pilot lamp (5 on the device)
The flashing or lighting of the pilot lamp depends on the
function of the device.
Pilot lamp Function of the device
Lit red Standby mode
Flashes blue Operation mode without an attached
iPod/iPhone/iPad
AUX-IN mode
Lit blue Operation mode with an attached iPod/
iPhone/iPad.
Insert/Replace Battery in Remote Control
NOTE:
The lithium cell in the battery compartment of the remote
control may have been safeguarded for transport with a
piece of foil. This extends the life of the battery. Please
remove this foil before the first use to make the remote
control ready for operation.
• Open the battery compartment on the underside of the
remote.
• Replace the cell by a battery of the same type (CR 2032).
Check that the polarity is correct (see battery compart-
ment).
• Close the battery compartment.
If the remote is not in use for a lengthy period of time, please
remove the battery to prevent the battery acid from “leaking”.
WARNING:
• Do not expose batteries to intense heat or direct
sunlight. Never throw batteries onto a fire. Danger of
explosion!
• Keep batteries out of the reach of children. They are
not toys.
• Do not force batteries open.