AEG HE604078XB - Manual (Page 26)

Always use cookware with clean bottom.
WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have no effect on how the appliance oper-
ates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the
dirt can cause damage to the appliance. Use a special scraper for the glass . Put
the scraper on the glass surface at an acute angle and move the blade on the sur-
face .
– Remove after the appliance is sufficiently cool: limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic
or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF…
Problem Possible cause and remedy
You cannot ac-
tivate the appli-
ance or operate
it.
• Activate the appliance again and set the heat setting in 10 seconds.
• You touched 2 or more sensor fields at the same time. Only touch one sen-
sor field.
• The Child Safety Device or the Lock or Stop+Go operates. See the chapter
Operating instruction.
• There is water or fat stains on the control panel. Clean the control panel.
A Sound oper-
ates and the ap-
pliance deacti-
vates.
A sound oper-
ates when the
appliance is de-
activated.
You put something on one or more sensor fields. Remove the object from the
sensor fields.
The residual
heat indicator
does not comes
on.
The cooking zone is not hot because it operated only for a short time. If the
cooking zone should be hot, speak to the service centre.
The Automatic
Heat Up func-
tion does not
operate.
• There is still residual heat on the cooking zone. Let the cooking zone be-
come sufficiently cool.
• The highest heat setting is set. The highest heat setting has the same pow-
er as the Automatic Heat Up function.
26 What to do if…