Buffalo Technology AIRSTATION WHR-G125 - Manual (Page 10)

10
To connect wireless devices to
the AirStation, you may either
enter the SSID and encryption key
manually, or you can use AOSS.
For more information on AOSS, see
pages 14 and 15.
Consult your wireless clients’
manuals for instructions on
configuring them manually. You
can get SSID and encryption
Connecting Wireless Clients to the Access Point
information from the AirStation’s initial setup screen, as shown above. The
default SSID is the wireless MAC address, available from the lable on the side
of the AirStation. The default encryption is disabled. If you prefer to use
encryption and/or a different SSID, you may change these default settings
under Basic Settings at the top left of the page.