AEG HK312000H - Manual (Page 21)

PRODUCT DESCRIPTION
Cooking surface layout
180
mm
180
mm
145
mm
145
mm
5 4
2 1
6 3
1 Single cooking zone 2000 W
2 Single cooking zone 2000 W
3 Single cooking zone 1500 W
4 Control knobs
5 Power indicator
6 Single cooking zone 1500 W
Electric cooking zones control knobs
Symbol Function
0 off position
minimum heat
3 maximum heat
OPERATION
To switch on and increase the heat setting turn the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch off turn the knob to the 0.
Power indicator is activated when either of the zones are turned on, and will stay on until
the cooking zones are switched off.
Before first use
Put on all cooking zones a pan filled with some water. Set the maximum position and oper-
ate the appliance for approximately 10 minutes until water inside the pans boils. After that,
operate the appliance at minimum position for 20 minutes. During this period, an odour
and smoke can occur. This is normal. Make sure that the airflow is sufficient.
After this operation, clean the appliance with a soft cloth soaked in warm water.
Rapid hot plate
A red dot in the middle of the plate shows a rapid hot plate. A rapid hot plate heats up
faster than usual plates.
The red dots are painted on the plates. They can deteriorate during use and even disappear
completely after a period of time. It does not have an effect on the performance of the
appliance.
Product description 21