Operating instructions – Bravetti EP109HA User Manual

Page 3

OPERATING INSTRUCTIONS

400 Watt Power Unit

The 400 Watt Power Unit operates on
120V., 60Hz. electrical power. Never
allow the power unit to become wet when
plugged into an electrical outlet.

Warning: The power unit should
never be immersed in water.
Caution: Make sure that the
power unit is unplugged from

power source and the blades have
stopped turning before attaching or
removing any accessory.
To operate the power unit, press on the
On/Off pulse button located on the top of
the unit. The power unit will stop
operating when you remove your finger
from the pulse button. (Fig. 7)

The Quad Blade Food Processor is an indispensable kitchen tool for blending, chopping,
mixing or pureeing when preparing your favorite recipes. For best results, be sure to
carefully read all the instructions contained in this book before using this appliance.

Important: Do NOT operate the appliance
when empty.

Using the Food Processor

Caution - Blades are sharp. Use
extreme caution when handling the

blade, always hold it by the plastic hub.
Do not immerse the power unit in water.

Note: The food processor can be used either
with both blades or with the main blade only.
• Place the glass processing jar onto the

slip guard pad. (Fig. 1)

• Remove the protective blade covers before

using the blades.

• Insert the main blade onto the blade

locating pin in the glass processing jar and
then slide the upper blade onto the shaft of
the main blade. (Fig. 2)

• Do NOT try to place the blades onto the

power unit and then into the glass
processing jar. (Fig. 3)

• Add ingredients to be processed.
• Fit the safety cover/splash guard in

position on the glass processing jar.
(Fig. 4 & 5) Make sure that the safety
cover/splash guard is secure in the glass
processing jar.

• Place the power unit on top of the safety

cover/splash guard making sure that it is
securely in place. (Fig. 6) Do NOT attempt
to operate the unit without the safety
cover/splash guard in place.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

OPERATING INSTRUCTIONS

Using the Food Processor

• In order to obtain a better quality of

chopping, operate the appliance by using a
"pulse" method. (Fig. 7 on page 3) If the
ingredients stick to the sides of the jar,
dislodge the pieces with a spatula and
operate 2 or 3 times using the "pulse"
method.

• Do NOT operate the appliance

continuously for more than 20 seconds.

CAUTION: Never place food
processor jar in microwave or over
direct heat.

NOTE: The bowl lid can
be used on the glass
processing jar if you
wish to store
something. (Fig. 8)

Using the Power Unit with the Glass
Chopping Bowl

Warning: The power unit should
never be immersed in water.
Caution: Make sure that the
power unit is unplugged from

Caution - Blades are sharp. Use
extreme caution when handling

the blade, always hold it by the plastic
hub.

• Place the power unit on top of the

safety cover/splash guard making
sure that it is securely in place and
does not wobble around. (Fig. 11)

• In order to obtain a better quality of

chopping, operate the appliance by
using a "pulse" method. If the
ingredients stick to the sides of the
bowl, dislodge the pieces with a
spatula and operate 2 or 3 times using
the "pulse" method. (Fig. 12)

• Do NOT operate the appliance

continuously for more than 15
seconds.

• Remove the power unit, safety

cover/splash guard and the chopping
blade carefully and cover the chopping
bowl with the lid for storage. (Fig. 13)

Fig. 8

• Place the glass chopping bowl onto the

slip guard pad.

• Place the chopping blade into the glass

bowl onto the blade locating pin.
(Fig. 9)

• Add ingredients to be chopped.
• Fit the safety cover/splash guard in

position on the glass bowl. (Fig. 10)

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Fig. 13

CAUTION: Never place food
processor bowls (glass or plastic)
in microwave or over direct heat.