BMW 745I User Manual

Page 51

At a glance

Controls

Driving tips

Communications

Navigation

Entertainment

Mobility

Reference

To lower: press the button, arrow 1, and
push down the head restraint.

To remove head restraints, refer to next
column.

To adjust center head restraint

If the head restraint has been low-
ered, pull it back up, continuing until

the detent engages, before allowing a pas-
senger to ride in the rear center position.
Failure to observe this precaution can
reduce the level of occupant protection.

To adjust electrically*

If necessary, adjust the head restraint's
height to ensure that it is centered at
roughly the height of the passenger's ears.

With the safety switch pressed, refer
to page

, the height adjustment of

the head restraints is deactivated.

The head restraints at the outer seating
positions extend automatically whenever
the system detects a passenger on the
seat. You can also adjust the height of the
head restraint electrically.

To prevent possible personal injury
and property damage, always ensure

that the area above the head restraints is
clear and unobstructed before extending
them upward.

Manual head restraint removal and
installation

Removal

Pull the head restraint upward to the
stop

Press the button, arrow 1, and remove
the head restraint.

Installation

Press the button, arrow 1, and slide the
head restraint into its support

Adjust the head restraint for your
personal comfort.

Rear comfort seat*

To adjust height