AEG MC 4443 CD-MP3 - Manual (Page 37)

English
37
WARNING:
• Do not expose the batteries to high temperatures or di-
rect sunlight. Never throw batteries into the fire. There
is a
danger of explosion!
• Keep batteries away from children. They are not a toy!
• Do not open the batteries by force.
• Avoid contact with metallic objects. (Rings, nails, screws
et cetera.) There is a danger of short-circuiting!
• As a result of a short-circuit batteries may heat up con-
siderably or even catch fire. This may result in burns.
• For your own safety the battery poles should be cov-
ered with adhesive strips during transport.
• If a battery leaks do not rub the liquid into your eyes or
mucous membranes. If hands come into contact with
the liquid they should be washed thoroughly and eyes
rinsed out with clear water; if symptoms persist please
consult a doctor.
CD deck transport protection
• Please open the CD compartment (1) by pressing the
OPEN (open) button (3).
• Remove the transport protection from the CD player if
present before use.
General Operation
NOTE:
Some keys are to be found both on the device itself and on
the remote control. Keys with the same designation have
the same function.
Volume
The desired volume can be sent using the VOLUME regula-
tor (4).
Switch-off
The machine is switched off when the function selector switch
(8) is turned to the OFF position. Unplug the device.
NOTE:
After about 10 minutes without signal, the device will auto-
matically switch to standby. Press the
PLAY/PAUSE/USB
button (6/1), to use the device again.
AUX IN socket
To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX IN socket (9).
2. Turn the function selector switch (8) to CD/MP3 or
RADIO. The device switches automatically to AUX IN
operation. The radio or CD sound is switched off.
3. Through the loudspeakers you can hear the playback of
the sound from the external device; with the VOLUME
control (4) you can change the volume. The CD buttons
do not have any function.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
USB Connexion (11)
This device has been developed in accordance with the
latest technical developments in the USB field. Unfortunately
the large number of different types of USB storage media on
offer today makes it impossible to guarantee full compatibil-
ity with all USB storage media. For this reason there may be
problems in rare cases with playing back from USB storage
media. This is
not a malfunction of the device.
1. Turn the function selector switch (8) to the CD/MP3 posi-
tion.
2. Insert a USB storage medium directly into the corre-
sponding connection.
3. Keep the PLAY/PAUSE/USB button (6/1) pressed
down in order to select USB mode. USB appears in the
display.
4. After a few seconds the total number of tracks appears
briefly and then playback begins. The current song and
the letters MP3 and USB appear in the display.
For operating instructions please see the section “Playing
CDs/MP3s”.
NOTE:
• If there is no CD in the CD compartment at the same
time, the USB connection is automatically selected.
• Always directly connect a USB storage device to the
USB connection to prevent possible operating malfunc-
tions.
• The USB connection is not suitable for charging exter-
nal devices.
CAUTION:
Before you remove the USB storage medium turn the func-
tion selector switch (8) to the RADIO position.
Listening to the Radio
1. Turn the function selector switch (8) to the RADIO posi-
tion.
2. Use the band selector switch (12) to select the desired
frequency band.
VHF (Stereo) = FM ST., VHF = FM,
Medium wave = AM (Mono)
3. Tune in the desired station with the station adjustment
knob TUNING (10).