6 spin, 7 temperature, Settings – AEG L98480FL User Manual
Page 15: 1 acoustic signals, 2 child lock, 3 permanent extra rinse, 4 weight sensor activating or deactivating
When you set this option, put the
stain remover into compartment .
This function increases the
programme duration.
This option is not
available with a
temperature lower than
40° C.
• Prewash: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have laundry with a
high level of soil.
The set of this option
increases the programme
duration.
7.6 Spin
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
with the set programme.
• Deactivate the spin phase.
• Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.7 Temperature
Press this button to change the default
temperature. When the display shows
and
, the appliance does not heat
the water.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Stain/Prewash and Extra
Rinse at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp. and Spin at the same
time until the indicator comes on/
goes off.
You can activate this option:
• After you press Start/Pause : the
options and the programme knob are
locked.
• Before you press Start/Pause : the
appliance cannot start.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Time Save and Delay Start at
the same time until the indicator Extra
Rinse comes on/goes off.
8.4 Weight sensor activating
or deactivating
To activate or deactivate the weight
sensors, press Temp. and Stain/Prewash
at the same time for some seconds.
ENGLISH
15