AEG HG694340NB - Manual (Page 17)

INSTALLATION
WARNING!
Refer to "Safety information"
chapter.
Before the installation
Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
BUILT-IN APPLIANCES
• Only use the built-in appliances after
you assemble the appliance into cor-
rect built-in units and work surfaces that
align to the standards.
CONNECTION CABLE
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a
single phase or two phase connection.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
90°C or higher). Speak to your local
Service Centre.
ASSEMBLY
min.
50mm
min.
50mm
min.
500mm
min.
5mm
600
mm
490 +1mm
680 +1mm
=
R 5
mm
ENGLISH
17