AEG SCS51810S0 - Manual (Page 20)

3. Remove the hinge cover (A). Unscrew the
pins (B) and spacers (C). Fit the hinge cov-
er (A).
4. Remove the lower door.
5. Loosen the lower pin.
On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the upper
pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
A
B
C
50 mm min.
200 cm 2
min.
200 cm 2
20 Installation