AEG F99009M0P - Manual (Page 23)

Problem Possible cause Possible solution
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad Delay and touchpad Start at the same time until the pro-
gramme indicators AUTO, PRO and SILENT flash.
4. Release touchpad Delay and touchpad Start.
5. Press touchpad Option.
• The programme indicators AUTO and SILENT go off.
• The programme indicator PRO continues to flash.
• The display shows the setting of the rinse aid dispenser.
The rinse aid dispenser is off.
The rinse aid dispenser is on.
6. Press touchpad Option to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions Width
Height
Depth
446 mm
850 mm
620 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
220-240 V
2100 W
10 A
50 Hz
Water supply pressure min.
max.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply 1) Cold water or hot water max. 60 °C
Technical data 23