1 acoustic signals, 2 child lock function, 3 permanent extra rinse – AEG L98699FL User Manual

Page 16: Before first use, 1 language setting, 2 change the language after the first activation, 3 clock setting, Settings 9. before first use, Settings

8. SETTINGS

8.1 Acoustic signals

You can hear the acoustic signals when:
• You activate the appliance.

• You deactivate the appliance.

• You touch the buttons.

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic

signals, press Stains/Prewash and Extra

Rinse at the same time for 6 seconds.

If you deactivate the

acoustic signals, they

continue operate only when

you touch the buttons and

when a malfunction occurs.

8.2 Child Lock function

With this function you can prevent that

the children play with the control panel.
• To activate/deactivate this function,

touch Temp. and Spin buttons at the

same time until the indicator

comes on/goes off.

You can activate this function:
• After you touch Start/Pause : all the

buttons and the programme knob are

deactivated.

• Before you touch Start/Pause : the

appliance cannot start.

8.3 Permanent Extra Rinse

With this function you can keep the extra

rinse permanently on when you set a new

programme.
• To activate/deactivate this function

touch Time Save and Delay Start at

the same time until the display show
the indicator

comes on/goes

off.

9. BEFORE FIRST USE

1. Put 2 litre of water in the detergent

compartment for washing phase.

This activates the drain system.

2. Put a small quantity of detergent in

the compartment for washing phase.

3. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

9.1 Language setting

The first time you activate the appliance,

the display shows the default language

and tells you to confirm it or change it:
1. Turn the programme knob to set the

desired language.

2. When the display shows the

necessary language touch Start/

Pause button to confirm the

selection.

9.2 Change the language after

the first activation

1. Touch button Spin and button

Stains/Prewash at the same time for

some seconds.

2. When the display shows the

language set, turn the programme

knob to set the new language.

3. Touch Start/Pause button to confirm

the selection.

9.3 Clock setting

After you set the language, the display

tells to set the clock. The hour digits

flash.
1. Turn the programme knob to change

the hour.

2. Touch Start/Pause button to confirm

the selection.

The minute digits flash.

3. Turn the programme knob to change

the minutes.