AEG HK634060XB - Manual (Page 16)

6. Loosely turn in fixing plates from
below on the worktop and on the
connection bar.
7. Put the subsequent appliance in the
worktop cut out . Make sure that the
front ends of the appliances are on
the same level.
8. Tighten the fixing plate / retaining
grip screws.
9. Seal the gap between the worktop
and appliances and between appli-
ances with silicone.
10. Put some soapy water on the silicon.
11. Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.
12. Do not touch the silicon until it be-
come hard, it can last about a day.
13. Carefully remove silicon that came
out with a shaving blade.
14. Clean glass ceramic fully.
9. TECHNICAL INFORMATION
Modell HC452020EB Prod.Nr. 941 560 824 01
Typ 55 FED 02 BO 220-240 V 50-60 Hz
Made in Switzerland
Ser.Nr. .......... 3.5 kW
AEG
Cooking zones power
Cooking zone Nominal Power (Max heat setting)
[W]
Middle rear —120 / 175 / 210 mm 800 / 1600 / 2300 W
16 www.aeg.com