beautypg.com

11 answering machine – AEG Voxtel D505 User Manual

Page 16

background image

16

tEnter the 4-digit system PIN (default 0000).
tPress

OK

to confirm, and the display will show “SEARCHING”.

If the handset registration is successful, you will hear a confirmation tone

and the will stop flashing.

The handset will automatically be allocated the next available handset

number. This handset number is shown in the handset display in standby

mode. If the handset registration is unsuccessful, the will still flash.

11 ANSWERING

MACHINE

Your phone includes a telephone answering machine that records

unanswered calls when it is on.The answering machine can store up to

59 messages within the maximum recording time of approximately 15

minutes. As well as recording incoming messages, you can record memos

for other users of your phone.

If the answering machine memory is full, the Handset will display “TAM

FULL” alternately with the handsets name or time, depending on the

handset standby display mode set. You will have to delete some messages

before any new ones can be recorded.

Some answering machine functions can be operated from the base,

including playing messages and turning the answering machine on or

off. The answering machine can also be controlled and set up using the

handset menu functions, as below.

11.1

Turn on/off the answering machine

You can turn the answering machine on or off using the handset.

When the answering machine is set to “ON”, calls will be answered after

the set answer delay and the caller can then leave you a message.

When the answering machine is set to “OFF”, calls will be answered after

14 rings and the answer only message will be played to your callers. They

will not be able to leave you a message.

tPress and

/ to select “ANS. MACHINE”.

tPress

OK

and / to select “TAM ON/OFF”.

tPress

OK

and / to select “ON” or “OFF”.

tPress

OK

to confirm.

>If answering machine is set to “ON”,

displays on the handset LCD.

>If answering machine is set to “OFF”,

will not display on the

handset LCD.