AEG Workshop charger WM 8 - Manual (Page 14)

GB 27 26
Charging phases
6V Low: slow charging
Once the battery has reached a voltage of 7.45 V the battery is fully charged. The
charger will then switch to maintenance charging at 220 mA.
12 V Low: slow charging
Once the battery has reached a voltage of 14.4 V the battery is fully charged. The
charger will then switch to maintenance charging at 70 mA.
12 V High: quick charging
Once the battery has reached a voltage between 14.5 V and 14.7 V the battery is
fully charged. As soon as the voltage drops to 13.7 V maintenance charging will
start.
End charging process
1. Unplug from the AC outlet.
2. Disconnect the charging clamp (black) from the vehicle’s body, in exceptions
from the negative battery terminal (marked N or -).
3. Disconnect the positive charging clamp (red) from the positive battery terminal
(marked P or +).
CLEANING, CARE AND SERVICE
Your charger can be kept functional for years with minimum care.
▪
After the charging process is completed, clean the clamps. To prevent corrosion,
wipe off any battery fluid that has come into contact with the clamps.
▪
Roll up the cables properly when you store the charger. This helps to prevent
damage to the cables and the charger.
▪
Occasional cleaning of the charger casing with a soft cloth keeps the surface
shiny and helps to prevent corrosion.
▪
Store the charger in a clean and dry location.
Service
Leave the repair of the device to qualified technical personnel. Thus, the safety of
the device is guaranteed and maintained.
Caution!
Only qualified technical personnel should change the plug or the connecting cables.
This will guarantee the safety of the device is maintained.
If the product is no longer suitable for use dispose of it in an environmentally
friendly manner in accordance with your local ordinances.
Disposal
Werfen Sie die Verpackung und das Produkt nicht in den Hausmüll!
Das Produkt und die Verpackung bestehen aus wiederverwendbaren
Stoffen (Kunststoffe, Metalle, Papier).
Entsorgen Sie ein nicht mehr verwendbares Produkt umweltgerecht, entsprechend
den örtlich geltenden Regelungen.
Warranty and Service
The general warranty terms apply to defects in manufacturing and material.
Please return the defective product to your retailer.
To process your claim efficiently you will also need:
▪
A copy of the receipt including date of purchase.
▪
Reason for return (description of defect).