3 cleaning the heat exchanger – AEG T88595IS User Manual

Page 19

2. Move the plastic connection out and

drain the water into a basin or

equivalent receptacle.

3. Move plastic connection in and install

water container.

4. To continue the programme press

the Start/Pause button.

11.3 Cleaning the heat

exchanger

If the symbol

Condenser

flashes on

the display, do the inspection of the heat

exchanger and its compartment. If there

is a dirt, clean it.
To do the inspection:
1. Open the door. Pull the filter.

2. Move the release button on the

bottom of the door to open the heat

exchanger door.

3. Turn the blockage to unlock the heat

exchanger cover.

4. Lower the heat exchanger cover.

5. If necessary, remove the fluff from

the heat exchanger and its

compartment. You can use wet cloth

and/or a vacuum cleaner with the

brush.

ENGLISH