AEG A72010GNW0 - Manual (Page 16)

8.6 Installation of the Taste Guard Filter
The Taste Guard Filter is an active car-
bon filter which absorbs bad odours
maintain the best flavour and aroma for
all foodstuffs without risk of odour cross
contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
• Open the air lever flap.
• Take the filter out of the plastic bag.
• Insert the filter in the slot found in the
back of the air lever flap.
• Close the air lever flap.
The filter should be handled
carefully so fragments do not
loosen from the surface.
Make sure that the air lever flap
is closed to obtain proper func-
tion.
8.7 Door reversibility
1
2
3
8
6
7
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power
socket.
• Tilt back the appliance carefully so
that the compressor cannot touch the
floor.
• Remove the plinth (1).
• Remove the cap (2) and position it on
the opposite side.
• Unscrew the hinge (3) and remove the
door.
• Unscrew the lower pin and the wash-
ers (3)
• Position the pin and the washers (4) on
the opposite side (5).
• Unscrew the other hinge (5)
16 www.aeg.com