AEG F55002VI0P - Manual (Page 7)

5. OPTIONS
5.1 Acoustic signals
The acoustic signals operate in these
conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic
signals.
Deactivating the acoustic signals
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold the programme but-
ton until the programme indicator (A)
flashes and the programme indicator
(B) comes on.
4. Press immediately the programme
button.
• The programme indicator (A)
comes on with a fixed light.
• The programme indicator (B) starts
to flash.
5. Wait until the programme indicator
(A) goes off and the end indicator
comes on (the programme indicator
(B) continues to flash).
• The acoustic signals are on.
6. Press the programme button. The
end indicator goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm
the setting.
Activating the acoustic signals
1. Refer to ‘Deactivating the acoustic
signals’, step (1) through (4).
2. Wait until the programme indicator
(A) goes off. The end indicator is off
and programme indicator (B) contin-
ues to flash.
• The acoustic signals are off.
3. Press the programme button. The
end indicator comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm
the setting.
6. BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
6.1 Adjusting the water
softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner-
als.
The dishwasher salt keeps the water
softener clean and in good conditions.
Refer to the table to adjust the water
softener to the right level. It makes sure
that the water softener uses the correct
quantity of dishwasher salt and water.
You must adjust the water soft-
ener manually and electronically.
ENGLISH
7